Deutsch   Français   Italiana   Español   English
CRM 2000 for recycling copper from old cables and cable waste. Depending on the diameter, the cable is inserted into the relevant hole where two rollers guide it over a blade which cuts the cable. Then the individual wires or cores can be rid of insulation on small rollers, if necessary.
CRM 2000 Copper Recycling Machine


Compact hydraulic shears Alligator CA 250 enable clean cutting of cables and soft metals (copper and aluminium) to precise lengths. The blade length of 250 mm enables easy insertion of the cut material.
Alligator CA 250 Cutting Machine


G96-1 is a compact but high-performance device for granulation of cables and copper, which are used for recycling of copper and aluminium from old cables or other residues. This device is attractive mainly due to its small size and quick and easy installation. Therefore, G96-1 granulation equipment is mobile, it can be used for dismantling industrial buildings or for time-limited work at one site.From a technological point of view, this equipment is an entirely closed system operated by one single person.
Cablegranulator G96-1


The Junior 25 cable peeler can process cables of 1–28 mm size. This slow-running machine is based on a simple construction design. The insulation is cut by two blades located horizontally opposite each other. Two synchronous rollers move the cables to the blades and then further along for take-off.
Junior 25 Copper Recycling Machine


MThe Maxi 100 cable peeler can process cables of 6–100 mm size. This slow-running machine is based on a simple construction design. The insulation is cut by two blades located horizontally opposite each other. Two synchronous rollers move the cables to the blades and then further along for take-off.
Maxi 100 Copper Recycling Machine


Say goodbye to tired hands and cable cutting tools with rachets! PowerBlade is operated very easily and can cut cables of sections up to 400 sq.mm.
Cutting Tool PowerBlade 35-078


Easy 120 is a compact but high-performance granulation machine used for recycling of copper from old cables or their residues. This device is attractive mainly due to its small size and quick and easy installation. Therefore, it is mobile and it can be used when dismantling industrial buildings or for time-limited work at one site. This completely self-containing equipment can be operated by one single person. It is also very suitable for the smallest cables made from cores (from computers and device, etc.)
Cablegranulator Easy 120


The Cable Stripper CS 3471 rapidly strips insulation from cables approx 3 – 90mm, allowing the metal within to be recycled. With upper and lower blade the insulation are cut very easy. With joystick it is very simple to do the adjustment of the blade and disc guide . Simple to set up and User-friendly.
Cable Stripper CS 3471


© cooperrecycling.ch  2010 - benetec / Leimattenstr. 6, CH - 8907 Wettswil / Tel. +41 (0) 44 700 24 18 / Fax. +41 (0) 44 700 24 19 / crm@copperrecycling.ch